74HC4024 7-Stage Binary Ripple Counter IC (744024 IC) DIP-14 Package

74HC4024 7-Stage Binary Ripple Counter IC (744024 IC) DIP-14 Package

In Stock
ENQUIRY!
Category:

The 74HC4024 is a 7-stage binary ripple counter with a clock input (CP), an overriding asynchronous master reset input (MR) and seven fully buffered parallel outputs (Q0 to Q6). The counter advances on the HIGH-to-LOW transition of CP. A HIGH on MR clears all counter stages and forces all outputs LOW, independent of the state of CP. Each counter stage is a static toggle flip-flop. Schmitt-trigger action in the clock input makes the circuit highly tolerant to slower clock rise and fall times. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Applications :-

  • Frequency dividing circuits
  • Time delay circuits

Description

Features :-

Low-power dissipation
Complies with JEDEC standard no. 7A
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from -40 ℃ to +80 ℃ and from -40 ℃ to +125 ℃

Specifications :-

Symbol Parameter Min Max Unit
VCC Supply Voltage  -0.5  +7 V
IIK input clamping current  –  +20 mA
Iok output clamping current   –  +20 mA
IO output current  –   +25 mA
ICC supply current  – +50 mA
IGND ground current  -50  – mA
Tstg storage temperature  -65  +150 °C
Ptot total power dissipation         –      500 mW

Package Includes :-

1 X 74HC4024 7-Stage Binary Ripple Counter IC (744024 IC) DIP-14 Package

Reviews

There are no reviews yet.

Be the first to review “74HC4024 7-Stage Binary Ripple Counter IC (744024 IC) DIP-14 Package”

Your email address will not be published. Required fields are marked *

Related products

74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package
Add to wishlist Compare

74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package

Read more
This device contains gates configured to perform a 4-2-3-2input AND-OR-INVERT function.
ENQUIRY!
74HC237 3-to-8 line Decoder/Demultiplexer IC (74237 IC) DIP-16 Package
Add to wishlist Compare

74HC237 3-to-8 line Decoder/Demultiplexer IC (74237 IC) DIP-16 Package

Read more
The 74HC237 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An). The 74HC237 essentially combines the 3-to-8 decoder function with a 3-bit storage latch. When the latch is enabled (LE = LOW), the 74HC237 acts as a 3-to-8 active LOW decoder. When the latch enable (LE) goes from LOW-to-HIGH, the last data present at the inputs before this transition, is stored in the latches. Further address changes are ignored as long as LE remains HIGH. The output enable input (E1 and E2) controls the state of the outputs independent of the address inputs or latch operation. All outputs are HIGH unless E1 is LOW and E2 is HIGH. The 74HC237 is ideally suited for implementing non-overlapping decoders in 3-state systems and strobes (stored address) applications in bus-oriented systems.
ENQUIRY!
74F182 Carry Lookahead Generator IC (74182) DIP-16 Package
Add to wishlist Compare

74F182 Carry Lookahead Generator IC (74182) DIP-16 Package

Read more
The 74F182 is a high-speed carry lookahead generator. It is  generally  used  with  the  74F181  or  74F381  4-bit  arithmetic  logic  units  to  provide  high-speed  lookahead  over word lengths of more than four bits

Features :-

  • Provides lookahead carries across a group of four ALUs
  • Multi-level  lookahead  high-speed  arithmetic  operation over long word lengths
ENQUIRY!
74F533 Octal Transparent Latch with 3-State Outputs IC (74533) DIP-20 Package
Add to wishlist Compare

74F533 Octal Transparent Latch with 3-State Outputs IC (74533) DIP-20 Package

Read more
The 74F533 consists of eight latches with 3-STATE outputs for   bus   organized   system   applications.   The   flip-flops appear transparent to the data when Latch Enable (LE) is HIGH.  When  LE  is  LOW,  the  data  that  meets  the  setup times is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH the bus output is in the high impedance state.

Features :-

  • Eight latches in a single package
  • 3-STATE outputs for bus interfacing
ENQUIRY!
74F521 8-Bit Identity Comparator IC (74521) DIP-20 Package
Add to wishlist Compare

74F521 8-Bit Identity Comparator IC (74521) DIP-20 Package

Read more
The 74F521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input IA=B also serves as an active LOW enable input

Features :-

  • Compares two 8-bit words in 6.5 ns typ
  • Expandable to any word length
  • 20-pin package
ENQUIRY!
74F109 Positive J-K Positive Edge-Triggered Flip-Flops IC (74109) DIP-16 Package
Add to wishlist Compare

74F109 Positive J-K Positive Edge-Triggered Flip-Flops IC (74109) DIP-16 Package

Read more
The 74F109 is a dual positive edge-triggered JK-type flip-flop featuring individual J, K, clock, set, and reset inputs; also true and complementary outputs. Set (SD) and reset (RD) are asynchronous active low inputs and operate independently of the clock (CP) input. The J and K are edge-triggered inputs which control the state changes of the flip-flops as described in the function table. Clock triggering occurs at a voltage level and is not directly related to the transition time of the positive-going pulse. The J and K inputs must be stable just one setup time prior to the low-to-high transition of the clock for predictable operation. The JK design allows operation as a D flip-flop by tying J and K inputs together. Although the clock input is level sensitive, the positive transition of the clock pulse between the 0.8V and 2.0V levels should be equal to or less than the clock to output delay time for reliable operation

Features :-

Industrial temperature range available (–40°C to +85°C)
ENQUIRY!

Product Enquiry