74HC194 4-Bit Bi-directional Shift Register IC (74194 IC) DIP-16 Package

74HC194 4-Bit Bi-directional Shift Register IC (74194 IC) DIP-16 Package

In Stock
ENQUIRY!
Category:

The 74HC194/74HCT194 is a 4-bit bidirectional universal shift register. The synchronous operation of the device is determined by the mode select inputs (S0, S1). In parallel load mode (S0 and S1 HIGH) data appearing on the D0 to D3 inputs, when S0 and S1 are HIGH, is transferred to the Q0 to Q3 outputs. When S0 is HIGH and S1 is LOW data is entered serially via DSL and shifted from left to right; when S0 is LOW and S1 is HIGH data is entered serially via DSR and shifted from right to left. DSR and DSL allow multistage shift right or shift left data transfers without interfering with parallel load operation. If both S0 and S1 are LOW, existing data is retained in a hold mode. Mode select and data inputs are edge-triggered, responding only to the LOW-to-HIGH transition of the clock (CP). Therefore, the only timing restriction is that the mode control and selected data inputs must be stable one set-up time prior to the positive transition of the clock pulse. When LOW, the asynchronous master reset (MR) overrides all other input conditions and forces the Q outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Description

Features :-

  • Wide supply voltage range from 2.0 V to 6.0 V
  • CMOS low power dissipation
  • High noise immunity
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
  • Complies with JEDEC standards:

JESD8C (2.7 V to 3.6 V)

JESD7A (2.0 V to 6.0 V)

  • CMOS input levels
  • Shift-left and shift right capability
  • Synchronous parallel and serial data transfer
  • Easily expanded for both serial and parallel operation
  • Asynchronous master reset
  • Hold (‘do nothing’) mode
  • ESD protection:

HBM JESD22-A114F exceeds 2000 V

MM JESD22-A115-A exceeds 200 V

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

Specifications :-

Parameter Min Max Unit
Supply Voltage (VCC) 2 6 V
DC Input or Output Voltage (VIN, VOUT) 0 Vcc V
Ambient Temperature -40 +125 °C
Input Rise or Fall Times
VCC = 2.0V 625 ns
VCC = 4.5V 139 ns
VCC = 6.0V 83 ns

Package Includes :-

1 X 74HC194 4-Bit Bi-directional Shift Register IC (74194 IC) DIP-16 Package

Reviews

There are no reviews yet.

Be the first to review “74HC194 4-Bit Bi-directional Shift Register IC (74194 IC) DIP-16 Package”

Your email address will not be published. Required fields are marked *

Related products

74HC163 Presettable synchronous Binary counter IC (74163) DIP-16 Package
Add to wishlist Compare

74HC163 Presettable synchronous Binary counter IC (74163) DIP-16 Package

Read more
The 74HC163; 74HCT163 is a synchronous presettable binary counter with an internal look-head carry. Synchronous operation is provided by having all flip-flops clocked simultaneously on the positive-going edge of the clock (CP). The outputs (Q0 to Q3) of the counters may be preset to a HIGH or LOW. A LOW at the parallel enable input (PE) disables the counting action. It causes the data at the data inputs (D0 to D3) to be loaded into the counter on the positive-going edge of the clock. Preset takes place regardless of the levels at count enable inputs (CEP and CET). A LOW at the master reset input (MR) sets Q0 to Q3 LOW after the next positive-going transition on the clock input (CP). This action occurs regardless of the levels at input pins PE, CET and CEP. This synchronous reset feature enables the designer to modify the maximum count with only one external NAND gate. The look-ahead carry simplifies serial cascading of the counters. Both CEP and CET must be HIGH to count. The CET input is fed forward to enable the terminal count output (TC). The TC output thus enabled will produce a HIGH output pulse of a duration approximately equal to a HIGH output of Q0. This pulse can be used to enable the next cascaded stage. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC

Features :-

  • Complies with JEDEC standard no. 7A
  • Input levels:
For 74HC163: CMOS level For 74HCT163: TTL level
  • Synchronous counting and loading
  • 2 count enable inputs for n-bit cascading
  • Synchronous reset
  • Positive-edge triggered clock
  • ESD protection:
HBM JESD22-A114F exceeds 2 000 V MM JESD22-A115-A exceeds 200 V
  • Multiple package options
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C
ENQUIRY!
74HC20 Dual 4-input NAND Gate IC (7420 IC) DIP-14 Package
Add to wishlist Compare

74HC20 Dual 4-input NAND Gate IC (7420 IC) DIP-14 Package

Read more
The 74HC20 is a 14 Pin Quad 4-Input NAND Gate IC. This device contains four independent gates each of which performs the logic NAND function. NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs. All devices have high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
ENQUIRY!
74F541 Octal Buffer/Line Driver with 3-State Outputs IC (74541) DIP-20 Package
Add to wishlist Compare

74F541 Octal Buffer/Line Driver with 3-State Outputs IC (74541) DIP-20 Package

Read more
The 74F541 except that the inputs and outputs are on opposite sides of the package (see Connection Diagrams). This pinout arrangement makes these devices especially useful as output ports for microprocessors, allowing ease of layout and greater PC board density

Features :-

  • 3-STATE outputs drive bus lines
  • Inputs and outputs opposite side of package, allowing easier interface to microprocessors
ENQUIRY!
74F113 Dual JK Negative Edge-Triggered Flip-Flop IC (74113) DIP-16 Package
Add to wishlist Compare

74F113 Dual JK Negative Edge-Triggered Flip-Flop IC (74113) DIP-16 Package

Read more
The  74F113  offers  individual  J,  K,  Set and  Clock inputs. When the clock goes  HIGH, the inputs are enabled  and data may be entered. The logic level of the J and K inputs may be changed when the clock pulse is HIGH and the flip-flop  will  perform  according  to  the  Truth  Table  as  long  as minimum setup and hold times are observed. Input data is transferred  to  the  outputs  on  the  falling  edge  of  the  clock pulse.

Features :-

  • Asynchronous input: LOW input to SD sets Q to HIGH level Set is independent of clock
ENQUIRY!
74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package
Add to wishlist Compare

74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package

Read more
The 74F244 is an octal buffer that is ideal for driving bus lines of buffer memory address registers. The outputs are all capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F244 is functionally equivalent to the 74F244. It has been designed to reduce effects of ground noise. Other advantages are noted in the features

Features :-

  • Octal bus interface
  • 3-State output buffer sink 64mA
  • 15mA source current
  • Guaranteed output skew less than 2.0ns (74F244B)
  • Reduced ground bounce (74F244B)
  • Reduced ICC (74F244B)
  • Reduced loading (74F244B IIL = 40μA)
  • Split lead frame offers increased noise immunity (74F244B)
  • Industrial temperature range available (-40°C to +85°C) for 74F244
  • 74F244 available in SSOP Type II package
ENQUIRY!
74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package
Add to wishlist Compare

74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package

Read more
This device contains gates configured to perform a 4-2-3-2input AND-OR-INVERT function.
ENQUIRY!

Product Enquiry