74F182 Carry Lookahead Generator IC (74182) DIP-16 Package

74F182 Carry Lookahead Generator IC (74182) DIP-16 Package

In Stock
ENQUIRY!
Category:

The 74F182 is a high-speed carry lookahead generator. It is  generally  used  with  the  74F181  or  74F381  4-bit  arithmetic  logic  units  to  provide  high-speed  lookahead  over word lengths of more than four bits

Features :-

  • Provides lookahead carries across a group of four ALUs
  • Multi-level  lookahead  high-speed  arithmetic  operation over long word lengths

Description

Specifications :-

  • Supply voltage : +4.5V – +5.5V
  • High–level input voltage : 2.0V
  • Low–level input voltage : 0.8V
  • Input Clamp Diode Voltage : -1.2V
  • Input High Current : 5.0μA
  • Output Low Voltage : 0.5V
  • Input High Current Breakdown Test : 7.0μA
  • Output High Leakage Current : 50μA
  • Output Leakage Circuit Current : 3.75μA
  • Output Short-Circuit Current : −60  −150mA

Package Includes :-

1 X 74F182 Carry Lookahead Generator IC (74182) DIP-16 Package

Reviews

There are no reviews yet.

Be the first to review “74F182 Carry Lookahead Generator IC (74182) DIP-16 Package”

Your email address will not be published. Required fields are marked *

Related products

74F74 Dual D-Type Positive Edge-Triggered Flip-Flop IC (7474) DIP-14 Package
Add to wishlist Compare

74F74 Dual D-Type Positive Edge-Triggered Flip-Flop IC (7474) DIP-14 Package

Read more
The F74 is a dual D-type flip-flop with Direct Clear and Set inputs  and  complementary  (Q,  Q)  outputs.  Information  at the input is transferred to the outputs on the positive edge of the clock pulse. Clock triggering occurs at a voltage level of the clock pulse and is not directly related to the transition time of the positive-going pulse. After the Clock Pulse input threshold  voltage  has  been  passed,  the  Data  input  is locked out and information present will not be transferred to the  outputs  until  the  next  rising  edge  of  the  Clock  Pulse input.

Features :-

  • Asynchronous Inputs:
  • LOW input to SD sets Q to HIGH level
  • LOW input to CD sets Q to LOW level
  • Clear and Set are independent of clock
  • Simultaneous LOW on CD and SD makes both Q and Q HIGH
ENQUIRY!
74F251 8-Inputs Multiplexer with 3-State Outputs IC (74251) DIP-16 Package
Add to wishlist Compare

74F251 8-Inputs Multiplexer with 3-State Outputs IC (74251) DIP-16 Package

Read more
The 74F251 is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. It can be used as a universal function generator to generate any logic function of four variables. Both assertion and negation outputs are provided

Features :-

  • Multifunctional Capacity
  • On-Chip Select Logic Decoding
  • Inverting and Noninverting 3-State Output
ENQUIRY!
74HC158 Quad 2-Input Multiplexer IC (74158 IC) DIP-16 Package
Add to wishlist Compare

74HC158 Quad 2-Input Multiplexer IC (74158 IC) DIP-16 Package

Read more
74HC158 is a 16 Pin Quad 2-Input Multiplexer IC having 2V to 6V Operating Voltage range with 1uA Low Input current and high noise immunity. It select 4 bits of data from two sources under the control of a common data select input (S). The enable input (E) is active LOW. When E is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all other input conditions.

Features:-

  • Common Select Input
  • Separate Enable Inputs
  • Buffered inputs and Outputs
  • Fanout (Over Temperature Range)
  • Standard Outputs  : 10 LSTTL Loads
  • Bus Driver Outputs : 15 LSTTL Loads
  • Wide Operating Temperature Range : -55oC to 125oC
  • Balanced Propagation Delay and Transition Times
  • Significant Power Reduction Compared to LSTTL Logic ICs
  • HC Types
  • 2V to 6V Operation
  • High Noise Immunity: NIL = 30%, NIH = 30%of VCC at VCC = 5V
  • HCT Types-
  • 4.5V to 5.5V Operation
  • Direct LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH = 2V (Min)
  • CMOS Input Compatibility, Il≤1μA at VOL, VOH
 
ENQUIRY!
74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package
Add to wishlist Compare

74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package

Read more
This device contains gates configured to perform a 4-2-3-2input AND-OR-INVERT function.
ENQUIRY!
74F521 8-Bit Identity Comparator IC (74521) DIP-20 Package
Add to wishlist Compare

74F521 8-Bit Identity Comparator IC (74521) DIP-20 Package

Read more
The 74F521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input IA=B also serves as an active LOW enable input

Features :-

  • Compares two 8-bit words in 6.5 ns typ
  • Expandable to any word length
  • 20-pin package
ENQUIRY!
74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package
Add to wishlist Compare

74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package

Read more
The 74F244 is an octal buffer that is ideal for driving bus lines of buffer memory address registers. The outputs are all capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F244 is functionally equivalent to the 74F244. It has been designed to reduce effects of ground noise. Other advantages are noted in the features

Features :-

  • Octal bus interface
  • 3-State output buffer sink 64mA
  • 15mA source current
  • Guaranteed output skew less than 2.0ns (74F244B)
  • Reduced ground bounce (74F244B)
  • Reduced ICC (74F244B)
  • Reduced loading (74F244B IIL = 40μA)
  • Split lead frame offers increased noise immunity (74F244B)
  • Industrial temperature range available (-40°C to +85°C) for 74F244
  • 74F244 available in SSOP Type II package
ENQUIRY!

Product Enquiry