74LS399 Quad 2-Port Register IC (74399) DIP-14 Package

74LS399 Quad 2-Port Register IC (74399) DIP-14 Package

In Stock
ENQUIRY!
Category:

The 74LS399 are Quad 2-Port Registers. They are the logical equivalent of a quad 2-input multiplexer followed by a quad 4-bit edge-triggered register. A Common Select input selects between two 4-bit in put ports (data sources). The selected data is transferred to the output register on the LOW-to-HIGH transition of the Clock input. The 74LS398 features Q and Q inputs, while the 74LS399 has only Q outputs.

Description

Features :-

  • Select From Two Data Sources
  • Fully Positive Edge-Triggered Operation
  • Input Clamp Diodes Limit High-Speed Termination Effects

Specifications :-

  • Supply Voltage Min : 4.75V
  • Supply Voltage Max : 5.25V
  • Operating Ambient Temperature Range Max : 70°C
  • Output Current — High Max : -0.4mA
  • Output Current — Low Max : 8.0mA
  • Power Supply Current : 13mA

Package Includes :-

1 X 74LS399 Quad 2-Port Register IC (74399) DIP-14 Package

Reviews

There are no reviews yet.

Be the first to review “74LS399 Quad 2-Port Register IC (74399) DIP-14 Package”

Your email address will not be published. Required fields are marked *

Related products

74F251 8-Inputs Multiplexer with 3-State Outputs IC (74251) DIP-16 Package
Add to wishlist Compare

74F251 8-Inputs Multiplexer with 3-State Outputs IC (74251) DIP-16 Package

Read more
The 74F251 is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. It can be used as a universal function generator to generate any logic function of four variables. Both assertion and negation outputs are provided

Features :-

  • Multifunctional Capacity
  • On-Chip Select Logic Decoding
  • Inverting and Noninverting 3-State Output
ENQUIRY!
74F109 Positive J-K Positive Edge-Triggered Flip-Flops IC (74109) DIP-16 Package
Add to wishlist Compare

74F109 Positive J-K Positive Edge-Triggered Flip-Flops IC (74109) DIP-16 Package

Read more
The 74F109 is a dual positive edge-triggered JK-type flip-flop featuring individual J, K, clock, set, and reset inputs; also true and complementary outputs. Set (SD) and reset (RD) are asynchronous active low inputs and operate independently of the clock (CP) input. The J and K are edge-triggered inputs which control the state changes of the flip-flops as described in the function table. Clock triggering occurs at a voltage level and is not directly related to the transition time of the positive-going pulse. The J and K inputs must be stable just one setup time prior to the low-to-high transition of the clock for predictable operation. The JK design allows operation as a D flip-flop by tying J and K inputs together. Although the clock input is level sensitive, the positive transition of the clock pulse between the 0.8V and 2.0V levels should be equal to or less than the clock to output delay time for reliable operation

Features :-

Industrial temperature range available (–40°C to +85°C)
ENQUIRY!
74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package
Add to wishlist Compare

74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package

Read more
The 74F244 is an octal buffer that is ideal for driving bus lines of buffer memory address registers. The outputs are all capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F244 is functionally equivalent to the 74F244. It has been designed to reduce effects of ground noise. Other advantages are noted in the features

Features :-

  • Octal bus interface
  • 3-State output buffer sink 64mA
  • 15mA source current
  • Guaranteed output skew less than 2.0ns (74F244B)
  • Reduced ground bounce (74F244B)
  • Reduced ICC (74F244B)
  • Reduced loading (74F244B IIL = 40μA)
  • Split lead frame offers increased noise immunity (74F244B)
  • Industrial temperature range available (-40°C to +85°C) for 74F244
  • 74F244 available in SSOP Type II package
ENQUIRY!
74F182 Carry Lookahead Generator IC (74182) DIP-16 Package
Add to wishlist Compare

74F182 Carry Lookahead Generator IC (74182) DIP-16 Package

Read more
The 74F182 is a high-speed carry lookahead generator. It is  generally  used  with  the  74F181  or  74F381  4-bit  arithmetic  logic  units  to  provide  high-speed  lookahead  over word lengths of more than four bits

Features :-

  • Provides lookahead carries across a group of four ALUs
  • Multi-level  lookahead  high-speed  arithmetic  operation over long word lengths
ENQUIRY!
74HC158 Quad 2-Input Multiplexer IC (74158 IC) DIP-16 Package
Add to wishlist Compare

74HC158 Quad 2-Input Multiplexer IC (74158 IC) DIP-16 Package

Read more
74HC158 is a 16 Pin Quad 2-Input Multiplexer IC having 2V to 6V Operating Voltage range with 1uA Low Input current and high noise immunity. It select 4 bits of data from two sources under the control of a common data select input (S). The enable input (E) is active LOW. When E is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all other input conditions.

Features:-

  • Common Select Input
  • Separate Enable Inputs
  • Buffered inputs and Outputs
  • Fanout (Over Temperature Range)
  • Standard Outputs  : 10 LSTTL Loads
  • Bus Driver Outputs : 15 LSTTL Loads
  • Wide Operating Temperature Range : -55oC to 125oC
  • Balanced Propagation Delay and Transition Times
  • Significant Power Reduction Compared to LSTTL Logic ICs
  • HC Types
  • 2V to 6V Operation
  • High Noise Immunity: NIL = 30%, NIH = 30%of VCC at VCC = 5V
  • HCT Types-
  • 4.5V to 5.5V Operation
  • Direct LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH = 2V (Min)
  • CMOS Input Compatibility, Il≤1μA at VOL, VOH
 
ENQUIRY!
74HC109 Dual J-K Negative-Edge-Triggered Flip-Flops IC (74109) DIP-16 Package
Add to wishlist Compare

74HC109 Dual J-K Negative-Edge-Triggered Flip-Flops IC (74109) DIP-16 Package

Read more
74HC109 Dual J-K Positive-Edge-Triggered Flip-Flop IC – DIP-16 Package The 74HC109 is a dual positive edge triggered JK flip-flop featuring individual nJ and nK inputs. It has clock (nCP) inputs, set (nSD) and reset (nRD) inputs and complementary nQ and nQ outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. The nJ and nK inputs control the state changes of the flip-flops as described in the mode select function table. The nJ and nK inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. The JK design allows operation as a D-type flip-flop by connecting the nJ and nK inputs together. Inputs include clamp diodes. It enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product is known as 74109 IC, 74109 SMD IC, 74HC109 IC, 74HC109 SMD IC, Components, Dual J-K Positive-Edge-Triggered Flip-Flops IC, Dual J-K Positive-Edge-Triggered Flip-Flops SMD IC, SN74HC109D, CD74HC109M, 74HC109D, CD74HC109E, SN74HC109N, CD74HC109ME4.

Features :-

  • Input Levels :
– For 74HC109: CMOS level – For 74HCT109: TTL level
  • J and K inputs for easy D-type flip-flop
  • Toggle flip-flop or “do nothing” mode
  • Specified in compliance with JEDEC standard no. 7A
  • ESD protection:
– HBM JESD22-A114F exceeds 2000 V – MM JESD22-A115-A exceeds 200 V
  • Multiple package options
ENQUIRY!

Product Enquiry