PIC18F2550 Microcontroller

PIC18F2550 Microcontroller

In Stock
ENQUIRY!
Category:

The PIC18F2550 is a 28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology. The following are the features:-

• High-Current Sink/Source: 25 mA/25 mA

• Three External Interrupts

• Four Timer modules (Timer0 to Timer3)

• Up to 2 Capture/Compare/PWM (CCP) modules:

– Capture is 16-bit, max. resolution 5.2 ns (TCY/16)

– Compare is 16-bit, max. resolution 83.3 ns (TCY)

– PWM output: PWM resolution is 1 to 10-bit

• Enhanced Capture/Compare/PWM (ECCP) module:

– Multiple output modes

– Selectable polarity

– Programmable dead time

– Auto-shutdown and auto-restart

• Enhanced USART module: – LIN bus support

• Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes

• 10-Bit, Up to 13-Channel Analog-to-Digital Converter (A/D) module with Programmable Acquisition Time

• Dual Analog Comparators with Input Multiplexing

Description

Specification:-

Parameter Value
Program Memory Type Flash
Program Memory Size (KB) 32
CPU Speed (MIPS/DMIPS) 12
SRAM (B) 2048
Temperature Range (°C) -40 to 125
Operating Voltage Range (V) 2 to 5.5
Pin Count 28
Timers 1 x 8-bit, 3 x 16-bit
ADC Input 10 ch, 10-bit
Capture/Compare/PWM Peripherals 2 Input Capture, 2 CCP
Digital Communication Peripherals 1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
Data EEPROM/HEF (bytes) 256

Reviews

There are no reviews yet.

Be the first to review “PIC18F2550 Microcontroller”

Your email address will not be published. Required fields are marked *

Related products

PIC16F684 Microcontroller
Add to wishlist Compare

PIC16F684 Microcontroller

Read more
The PIC16F684 is a 14-Pin Flash-Based, 8-Bit CMOS Microcontrollers with nano Watt Technology . The following are the features:- • 17 1/0 Pins and I Input-only Pin: - High current source/sink for direct LED drive -  Interrupt-on-Change pin -  Individually programmable weak pull-ups - Ultra Low-power Wake-up (LJLPWU) • Analog Comparator Module With: - TWO analog comparators - Programmable on-chip voltage reference (CVREF) module (% of Voo) - Comparator inputs and outputs externally accessible - SR Latch mode - Timer I Gate Sync Latch - Fixed O.6VVREF • AID Converter:  ID-bit resolution and 12 channels • Timer 8-Bit Timer/Counter With 8-Bit rammable Prescaler
ENQUIRY!
PIC16F690 Microcontroller
Add to wishlist Compare

PIC16F690 Microcontroller

Read more
The PIC16F690 is a 20-Pin Flash-Based, 8-Bit CMOS Microcontrollers. The following are the features:- • 17 1/0 Pins and I Input-only Pin: - High current source/sink for direct LED drive -  Interrupt-on-Change pin -  Individually programmable weak pull-ups - Ultra Low-power Wake-up (LJLPWU) • Analog Comparator Module With: - TWO analog comparators - Programmable on-chip voltage reference (CVREF) module (% of VDD) - Comparator inputs and outputs externally accessible - SR Latch mode - Timer I Gate Sync Latch - Fixed O.6VVREF • AID Converter:  ID-bit resolution and 12 channels • Timer 8-Bit Timer/Counter With 8-Bit rammable Prescaler
ENQUIRY!
PIC16F616 Microcontroller
Add to wishlist Compare

PIC16F616 Microcontroller

Read more
PIC16F616  Microcontroller The PIC16F range of microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip’s PIC® architecture into a variety of pin and package options, from space efficient 14-pin devices to feature-rich 64-pin devices. Devices with Baseline, Mid-Range or Enhanced Mid-Range architecture are available with numerous different peripheral combinations, giving designers flexibility and choice for their applications. The PIC16F616 family of microcontrollers is based upon Microchip’s Mid-Range core with a 8 level deep hardware stack and 35 instructions. These MCUs provide up to 5 MIPS, up to 3.5 Kbytes program memory, up to 128 bytes RAM and Data EEPROM of up to 128 bytes. On board is a configurable oscillator factory calibrated to ±1% accuracy.
ENQUIRY!
PIC12F675 Microcontroller
Add to wishlist Compare

PIC12F675 Microcontroller

Read more
The PIC12F675 has a 13-bit program counter capable of addressing an 8K x 14 program memory space. The data memory is partitioned into two banks, which contain the General Purpose Registers and the Special Function Registers. The register file is organized as 64 x 8 in the PIC12F675 device. Each register is accessed, either directly or indirectly, through the File Select Register FSR. There are as many as six general purpose I/O pins available. Depending on which peripherals are enabled, some or all of the pins may not be available as general purpose I/O. In general, when a peripheral is enabled, the associated pin may not be used as a general purpose I/O pin.
ENQUIRY!
PIC16C54 Microcontroller
Add to wishlist Compare

PIC16C54 Microcontroller

Read more
The PIC16C54 is powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single-word instructions) FLASH-based 8-bit micro controller packs Microchip’s powerful PICmicro® architecture into an 18-pin package. Easily adapted for automotive, industrial, appliances and consumer entry-level product applications.
ENQUIRY!
PIC16F870 Microcontroller
Add to wishlist Compare

PIC16F870 Microcontroller

Read more
The PIC16F870  is a 28/40-Pin, 8-Bit CMOS FLASH Microcontrollers. The following are the features:- • Timer0: 8-bit timer/counter with 8-bit prescaler • Timer1: 16-bit timer/counter with prescaler, can be incremented during SLEEP via external crystal/clock • Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler • One Capture, Compare, PWM module - Capture is 16-bit, max. resolution is 12.5 ns - Compare is 16-bit, max. resolution is 200 ns - PWM max. resolution is 10-bit • 10-bit multi-channel Analog-to-Digital converter • Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection • Parallel Slave Port (PSP) 8-bits wide, with external RD, WR and CS controls (40/44-pin only) • Brown-out detection circuitry for Brown-out Reset (BOR)
ENQUIRY!

Product Enquiry