Atmega16A Microcontroller

Atmega16A Microcontroller

In Stock
ENQUIRY!
Category:

The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega16A achieves throughputs approaching 1 MIPS per MHz allowing the system designed to optimize power consumption versus processing speed.

The AVR core combines a rich instruction set with 32 general purpose working registers. All the32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

Description

Features of ATmega16A Microcontroller:-

  • Advanced RISC Architecture.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 16 MIPS Throughput at 16 MHz.
  • Advanced RISC Architecture.
  • On-chip 2-cycle Multiplier.
  • High Endurance Non-volatile Memory segments.
  • 16 Kbytes of In-System Self-programmable Flash program memory.
  • 512 Bytes EEPROM.
  • 1 Kbyte Internal SRAM.
  • Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
  • Optional Boot Code Section with Independent Lock Bits.
  • In-System Programming by On-chip Boot Program.
  • True Read-While-Write Operation.
  • Programming Lock for Software Security.
  • JTAG (IEEE std. 1149.1 Compliant) Interface.
  • Boundary-scan Capabilities According to the JTAG Standard.
  • Extensive On-chip Debug Support.
  • Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
  • Peripheral Features.
  • Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes.
  • One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode.
  • Real Time Counter with Separate Oscillator.
  • Four PWM Channels.
  • 8-channel, 10-bit ADC.
  • 8 Single-ended Channels.
  • 7 Differential Channels in TQFP Package Only.
  • 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x.
  • Byte-oriented Two-wire Serial Interface.
  • Programmable Serial USART.
  • Master/Slave SPI Serial Interface.
  • Programmable Watchdog Timer with Separate On-chip Oscillator.

Applications of ATmega16A Microcontroller:-

  • Multiple DIY projects.
  • Projects requiring more than logical control for devices.
  • Microcontroller applications for multiple device interface/Control.
  • Replacement for Arduino module.
  • Needs a USB AVR programmer.

Reviews

There are no reviews yet.

Be the first to review “Atmega16A Microcontroller”

Your email address will not be published. Required fields are marked *

Related products

ATtiny85 Microcontroller
Add to wishlist Compare

ATtiny85 Microcontroller

Read more
ATtiny85 is a small 8-pin microcontroller from Atmel and is based on Atmel's 8-bit RISC architecture. ATtiny85 is a high-performance, low-power microcontroller which combines 8KB ISP flash memory, 512B EEPROM, 512-Byte SRAM, 6 general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes, one 8-bit high speed timer/counter, USI, internal and external Interrupts, 4-channel 10-bit Analog to Digital converter, programmable watchdog timer with internal oscillator, three software selectable power saving modes, and debug WIRE for on-chip debugging. The device achieves a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
ENQUIRY!
ATMega32A Microcontroller
Add to wishlist Compare

ATMega32A Microcontroller

Read more
ATMEGA32A is a 40 pin, 8-bit AVR RISC-based microcontroller from Atmel. It is a low power, high performance microcontroller featuring 32KB self-programming flash program memory, 2KB SRAM, 1KB EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device acheives 16 MIPS throughput at 16 Mhz at 2.7-5.5V operation. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed.
ENQUIRY!
ATtiny2313 Microcontroller
Add to wishlist Compare

ATtiny2313 Microcontroller

Read more
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 2KB ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, universal serial interface (USI), full duplex UART, and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
ENQUIRY!
ATmega328P Microcontroller
Add to wishlist Compare

ATmega328P Microcontroller

Read more
The ATMEGA328P-PU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU),allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
The ATmega328P-PU AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits.
ENQUIRY!
ATtiny2313 – SMD SOP-20 Package – 8-Bit AVR Microcontroller
Add to wishlist Compare

ATtiny2313 – SMD SOP-20 Package – 8-Bit AVR Microcontroller

Read more
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 2KB ISP flash memory, 128B ISP EEPROM, 128B internal SRAM, universal serial interface (USI), full duplex UART, and debugWIRE for on-chip debugging. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
ENQUIRY!
ATMEGA8515 Microcontroller
Add to wishlist Compare

ATMEGA8515 Microcontroller

Read more
ATMEGA8515 is a high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB of programmable flash memory, 544B internal memory, up to 64KB external SRAM, and 512B EEPROM. The device supports a throughput of 16 MIPS at 16MHz and operates between 2.7-5.5 volts. By executing instructions in a single clock cycle, the device achieves through puts approaching 1 MIPS per MHz, balancing power consumption and processing speed.
ENQUIRY!

Product Enquiry