74LS38 Quad 2-input NAND Buffer IC (7438) DIP-14 Package

74HC158 is a 16 Pin Quad 2-Input Multiplexer IC having 2V to 6V Operating Voltage range with 1uA Low Input current and high noise immunity. It select 4 bits of data from two sources under the control of a common data select input (S). The enable input (E) is active LOW. When E is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all other input conditions.

Features:-

• Common Select Input
• Separate Enable Inputs
• Buffered inputs and Outputs
• Fanout (Over Temperature Range)
• Standard Outputs  : 10 LSTTL Loads
• Bus Driver Outputs : 15 LSTTL Loads
• Wide Operating Temperature Range : -55oC to 125oC
• Balanced Propagation Delay and Transition Times
• Significant Power Reduction Compared to LSTTL Logic ICs
• HC Types
• 2V to 6V Operation
• High Noise Immunity: NIL = 30%, NIH = 30%of VCC at VCC = 5V
• HCT Types-
• 4.5V to 5.5V Operation
• Direct LSTTL Input Logic Compatibility, VIL= 0.8V (Max), VIH = 2V (Min)
• CMOS Input Compatibility, Il≤1μA at VOL, VOH

 

The  F280  is  a  high-speed  parity  generator/checker  that accepts  nine  bits  of  input  data  and  detects  whether  an even or an odd number of these inputs is HIGH. If an even number of inputs is HIGH, the Sum Even output is HIGH. I fan odd number is HIGH, the Sum Even output is LOW. The Sum Odd output is the complement of the Sum Even out-put

The F74 is a dual D-type flip-flop with Direct Clear and Set inputs  and  complementary  (Q,  Q)  outputs.  Information  at the input is transferred to the outputs on the positive edge of the clock pulse. Clock triggering occurs at a voltage level of the clock pulse and is not directly related to the transition time of the positive-going pulse. After the Clock Pulse input threshold  voltage  has  been  passed,  the  Data  input  is locked out and information present will not be transferred to the  outputs  until  the  next  rising  edge  of  the  Clock  Pulse input.

Features :-

• Asynchronous Inputs:
• LOW input to SD sets Q to HIGH level
• LOW input to CD sets Q to LOW level
• Clear and Set are independent of clock
• Simultaneous LOW on CD and SD makes both Q and Q HIGH

The 74F138 decoder accepts three binary weighted inputs (A0, A1, A2) and when enabled, provides eight mutually exclusive, active low outputs (Q0 – Q7). The device features three enable inputs; two active low (E0, E1) and one active high (E2). Every output will be high unless E0 and E1 are low and E2 is high. This multiple enable function allows easy parallel expansion of the device to 1–of–32 (5 lines to 32 lines) decoder with just four 74F138s and one inverter The device can be used as an eight output demultiplexer by using one of the active low enable inputs as the data input and the remaining enable inputs as strobes. Enable inputs not used must be permanently tied to their appropriate active high or active low state.

Features :-

• Demultiplexing capability
• Multiple input enable for easy expansion
• Ideal for memory chip select decoding
• Industrial temperature range available (–40°C to +85°C)