74LS126 Quad 3-State Buffer IC (74126 IC) DIP-14 Package

The 74F182 is a high-speed carry lookahead generator. It is  generally  used  with  the  74F181  or  74F381  4-bit  arithmetic  logic  units  to  provide  high-speed  lookahead  over word lengths of more than four bits

Features :-

• Provides lookahead carries across a group of four ALUs
• Multi-level  lookahead  high-speed  arithmetic  operation over long word lengths

The 74HC237 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An). The 74HC237 essentially combines the 3-to-8 decoder function with a 3-bit storage latch. When the latch is enabled (LE = LOW), the 74HC237 acts as a 3-to-8 active LOW decoder. When the latch enable (LE) goes from LOW-to-HIGH, the last data present at the inputs before this transition, is stored in the latches. Further address changes are ignored as long as LE remains HIGH. The output enable input (E1 and E2) controls the state of the outputs independent of the address inputs or latch operation. All outputs are HIGH unless E1 is LOW and E2 is HIGH. The 74HC237 is ideally suited for implementing non-overlapping decoders in 3-state systems and strobes (stored address) applications in bus-oriented systems.

The F74 is a dual D-type flip-flop with Direct Clear and Set inputs  and  complementary  (Q,  Q)  outputs.  Information  at the input is transferred to the outputs on the positive edge of the clock pulse. Clock triggering occurs at a voltage level of the clock pulse and is not directly related to the transition time of the positive-going pulse. After the Clock Pulse input threshold  voltage  has  been  passed,  the  Data  input  is locked out and information present will not be transferred to the  outputs  until  the  next  rising  edge  of  the  Clock  Pulse input.

Features :-

• Asynchronous Inputs:
• LOW input to SD sets Q to HIGH level
• LOW input to CD sets Q to LOW level
• Clear and Set are independent of clock
• Simultaneous LOW on CD and SD makes both Q and Q HIGH

The 74F244 is an octal buffer that is ideal for driving bus lines of buffer memory address registers. The outputs are all capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F244 is functionally equivalent to the 74F244. It has been designed to reduce effects of ground noise. Other advantages are noted in the features

Features :-

• Octal bus interface
• 3-State output buffer sink 64mA
• 15mA source current
• Guaranteed output skew less than 2.0ns (74F244B)
• Reduced ground bounce (74F244B)
• Reduced ICC (74F244B)
• Reduced loading (74F244B IIL = 40μA)
• Split lead frame offers increased noise immunity (74F244B)
• Industrial temperature range available (-40°C to +85°C) for 74F244
• 74F244 available in SSOP Type II package