74LS06 Hex Inverter Buffer IC (7406 IC) DIP-14 Package

74LS06 Hex Inverter Buffer IC (7406 IC) DIP-14 Package

In Stock
ENQUIRY!
Category:

This 74LS06 monolithic hex inverter buffers/drivers feature high-voltage open-collector outputs to interface with high-level circuits (such as MOS), or for driving high-current loads, and are also characterized for use as inverter buffers for driving TTL inputs. The ′LS06 has a rated output voltage of 30 V and the ′LS16 has a rated output voltage of 15 V. The maximum sink current for the 74LS06  is 40 mA. The circuits is compatible with most TTL families. Inputs are diode-clamped to minimize transmission-effects, which simplifies design. Typical power dissipation is 175 mW and average propagation delay time is 8 ns. The 74LS06 is characterized for operation from 0°C to 70°C.

Description

Features:-

• Converts TTL Voltage Levels to MOS Levels

• High Sink-Current Capability

• Input Clamping Diodes Simplify System Design

• Open-Collector Driver for Indicator Lamps and Relays

• Package Options Include “Small Outline” Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs

 Specifications:-

Parameter Specification
Supply Voltage (VCC 7 V
Input Voltage (VI) 5.5 V
Output Voltage (VO) 30 V
Operating free-air temperature range 0°C to70°C
Storage temperature range –65°C to 150°C

Reviews

There are no reviews yet.

Be the first to review “74LS06 Hex Inverter Buffer IC (7406 IC) DIP-14 Package”

Your email address will not be published. Required fields are marked *

Related products

74HC237 3-to-8 line Decoder/Demultiplexer IC (74237 IC) DIP-16 Package
Add to wishlist Compare

74HC237 3-to-8 line Decoder/Demultiplexer IC (74237 IC) DIP-16 Package

Read more
The 74HC237 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An). The 74HC237 essentially combines the 3-to-8 decoder function with a 3-bit storage latch. When the latch is enabled (LE = LOW), the 74HC237 acts as a 3-to-8 active LOW decoder. When the latch enable (LE) goes from LOW-to-HIGH, the last data present at the inputs before this transition, is stored in the latches. Further address changes are ignored as long as LE remains HIGH. The output enable input (E1 and E2) controls the state of the outputs independent of the address inputs or latch operation. All outputs are HIGH unless E1 is LOW and E2 is HIGH. The 74HC237 is ideally suited for implementing non-overlapping decoders in 3-state systems and strobes (stored address) applications in bus-oriented systems.
ENQUIRY!
74F182 Carry Lookahead Generator IC (74182) DIP-16 Package
Add to wishlist Compare

74F182 Carry Lookahead Generator IC (74182) DIP-16 Package

Read more
The 74F182 is a high-speed carry lookahead generator. It is  generally  used  with  the  74F181  or  74F381  4-bit  arithmetic  logic  units  to  provide  high-speed  lookahead  over word lengths of more than four bits

Features :-

  • Provides lookahead carries across a group of four ALUs
  • Multi-level  lookahead  high-speed  arithmetic  operation over long word lengths
ENQUIRY!
74F74 Dual D-Type Positive Edge-Triggered Flip-Flop IC (7474) DIP-14 Package
Add to wishlist Compare

74F74 Dual D-Type Positive Edge-Triggered Flip-Flop IC (7474) DIP-14 Package

Read more
The F74 is a dual D-type flip-flop with Direct Clear and Set inputs  and  complementary  (Q,  Q)  outputs.  Information  at the input is transferred to the outputs on the positive edge of the clock pulse. Clock triggering occurs at a voltage level of the clock pulse and is not directly related to the transition time of the positive-going pulse. After the Clock Pulse input threshold  voltage  has  been  passed,  the  Data  input  is locked out and information present will not be transferred to the  outputs  until  the  next  rising  edge  of  the  Clock  Pulse input.

Features :-

  • Asynchronous Inputs:
  • LOW input to SD sets Q to HIGH level
  • LOW input to CD sets Q to LOW level
  • Clear and Set are independent of clock
  • Simultaneous LOW on CD and SD makes both Q and Q HIGH
ENQUIRY!
74F251 8-Inputs Multiplexer with 3-State Outputs IC (74251) DIP-16 Package
Add to wishlist Compare

74F251 8-Inputs Multiplexer with 3-State Outputs IC (74251) DIP-16 Package

Read more
The 74F251 is a high-speed 8-input digital multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. It can be used as a universal function generator to generate any logic function of four variables. Both assertion and negation outputs are provided

Features :-

  • Multifunctional Capacity
  • On-Chip Select Logic Decoding
  • Inverting and Noninverting 3-State Output
ENQUIRY!
74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package
Add to wishlist Compare

74F244 Octal Buffers/Line Drivers with 3-State Outputs IC (74244) DIP-20 Package

Read more
The 74F244 is an octal buffer that is ideal for driving bus lines of buffer memory address registers. The outputs are all capable of sinking 64mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74F244 is functionally equivalent to the 74F244. It has been designed to reduce effects of ground noise. Other advantages are noted in the features

Features :-

  • Octal bus interface
  • 3-State output buffer sink 64mA
  • 15mA source current
  • Guaranteed output skew less than 2.0ns (74F244B)
  • Reduced ground bounce (74F244B)
  • Reduced ICC (74F244B)
  • Reduced loading (74F244B IIL = 40μA)
  • Split lead frame offers increased noise immunity (74F244B)
  • Industrial temperature range available (-40°C to +85°C) for 74F244
  • 74F244 available in SSOP Type II package
ENQUIRY!
74F521 8-Bit Identity Comparator IC (74521) DIP-20 Package
Add to wishlist Compare

74F521 8-Bit Identity Comparator IC (74521) DIP-20 Package

Read more
The 74F521 is an expandable 8-bit comparator. It compares two words of up to eight bits each and provides a LOW output when the two words match bit for bit. The expansion input IA=B also serves as an active LOW enable input

Features :-

  • Compares two 8-bit words in 6.5 ns typ
  • Expandable to any word length
  • 20-pin package
ENQUIRY!

Product Enquiry