74HC4511 BCD to 7 Segment Latch/Decoder/Drivers IC (744511) DIP-16 Package

74HC4511 BCD to 7 Segment Latch/Decoder/Drivers IC (744511) DIP-16 Package

In Stock
ENQUIRY!
Category:

The CD54HC4511, CD74HC4511, and CD74HCT4511 are BCD-to-7 segment latch/decoder/drivers with four address inputs (D0−D3), an active-low blanking (BL) input, lamp-test (LT) input, and a latch-enable (LE) input that, when high, enables the latches to store the BCD inputs. When LE is low, the latches are disabled, making the outputs transparent to the BCD inputs. These devices have standard-size output transistors, but are capable of sourcing (at standard VOH levels) up to 7.5 mA at 4.5 V. The HC types can supply up to 10 mA at 6 V.

Description

Features :-

  • 2-V to 6-V VCC Operation (’HC4511)
  • 4.5-V to 5.5-V VCC Operation (CD74HCT4511)
  • High-Output Sourcing Capability

− 7.5 mA at 4.5 V (CD74HCT4511)

− 10 mA at 6 V (’HC4511)

  • Input Latches for BCD Code Storage
  • Lamp Test and Blanking Capability
  • Balanced Propagation Delays and Transition Times
  • Significant Power Reduction Compared to LSTTL Logic ICs
  • HC4511
  • − High Noise Immunity, NIL or NIH = 30% of VCC at VCC = 5 V
  • CD74HCT4511

− Direct LSTTL Input Logic Compatibility, VIL = 0.8 V Maximum, VIH = 2 V Minimum

− CMOS Input Compatibility, II ≤ 1 µA at VOL, VOH

Specifications :-

  • Supply voltage min : 2V
  • Supply voltage Max : 6V
  • High-level input voltage min : 4.2V
  • Low-level input voltage max : 1.8V
  • Input transition (rise and fall) time VCC = 6 V max : 400ns

 

Package Includes :-

1 X 74HC4511 BCD to 7 Segment Latch/Decoder/Drivers IC (744511) DIP-16 Package

Reviews

There are no reviews yet.

Be the first to review “74HC4511 BCD to 7 Segment Latch/Decoder/Drivers IC (744511) DIP-16 Package”

Your email address will not be published. Required fields are marked *

Related products

74F240 Octal Buffers/Line Drivers with 3-State Outputs IC (74240) DIP-20 Package
Add to wishlist Compare

74F240 Octal Buffers/Line Drivers with 3-State Outputs IC (74240) DIP-20 Package

Read more
The 74F240 are octal buffers and line drivers designed to be employed as memory and address drivers, clock drivers and bus-oriented transmitters/receivers which provide improved PC and board density.

Features:-

  • 3-STATE outputs drive bus lines or buffer memory address registers
  • Outputs sink 64mA (48mA mil)
  • 12mA source current
  • Input clamp diodes limit high-speed termination effects
ENQUIRY!
74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package
Add to wishlist Compare

74F64 4-2-3-2-Input AND-OR-Invert Gate IC (7464) DIP-14 Package

Read more
This device contains gates configured to perform a 4-2-3-2input AND-OR-INVERT function.
ENQUIRY!
74F533 Octal Transparent Latch with 3-State Outputs IC (74533) DIP-20 Package
Add to wishlist Compare

74F533 Octal Transparent Latch with 3-State Outputs IC (74533) DIP-20 Package

Read more
The 74F533 consists of eight latches with 3-STATE outputs for   bus   organized   system   applications.   The   flip-flops appear transparent to the data when Latch Enable (LE) is HIGH.  When  LE  is  LOW,  the  data  that  meets  the  setup times is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH the bus output is in the high impedance state.

Features :-

  • Eight latches in a single package
  • 3-STATE outputs for bus interfacing
ENQUIRY!
74HC194 4-Bit Bi-directional Shift Register IC (74194 IC) DIP-16 Package
Add to wishlist Compare

74HC194 4-Bit Bi-directional Shift Register IC (74194 IC) DIP-16 Package

Read more
The 74HC194/74HCT194 is a 4-bit bidirectional universal shift register. The synchronous operation of the device is determined by the mode select inputs (S0, S1). In parallel load mode (S0 and S1 HIGH) data appearing on the D0 to D3 inputs, when S0 and S1 are HIGH, is transferred to the Q0 to Q3 outputs. When S0 is HIGH and S1 is LOW data is entered serially via DSL and shifted from left to right; when S0 is LOW and S1 is HIGH data is entered serially via DSR and shifted from right to left. DSR and DSL allow multistage shift right or shift left data transfers without interfering with parallel load operation. If both S0 and S1 are LOW, existing data is retained in a hold mode. Mode select and data inputs are edge-triggered, responding only to the LOW-to-HIGH transition of the clock (CP). Therefore, the only timing restriction is that the mode control and selected data inputs must be stable one set-up time prior to the positive transition of the clock pulse. When LOW, the asynchronous master reset (MR) overrides all other input conditions and forces the Q outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
ENQUIRY!
74F280 9-Bit Parity Generator/Checker IC (74280) DIP-14 Package
Add to wishlist Compare

74F280 9-Bit Parity Generator/Checker IC (74280) DIP-14 Package

Read more
The  F280  is  a  high-speed  parity  generator/checker  that accepts  nine  bits  of  input  data  and  detects  whether  an even or an odd number of these inputs is HIGH. If an even number of inputs is HIGH, the Sum Even output is HIGH. I fan odd number is HIGH, the Sum Even output is LOW. The Sum Odd output is the complement of the Sum Even out-put
ENQUIRY!
74HC20 Dual 4-input NAND Gate IC (7420 IC) DIP-14 Package
Add to wishlist Compare

74HC20 Dual 4-input NAND Gate IC (7420 IC) DIP-14 Package

Read more
The 74HC20 is a 14 Pin Quad 4-Input NAND Gate IC. This device contains four independent gates each of which performs the logic NAND function. NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard CMOS integrated circuits. All gates have buffered outputs. All devices have high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
ENQUIRY!

Product Enquiry